Dos and Don’ts for a Great Stamped Concrete Installation

»Posted by on Mar 23, 2018 in Stamped Concrete Installation | 0 comments

The amazing surface effects with decorative stamped concrete are actually part of the whole package. As a matter of fact, you will be having one of the toughest paving materials your money can buy – if it is properly installed. Long-term stamped concrete begins with the basics such as ideal jobsite conditions, experienced and professional installer, good materials and the right tools. The following are the 5 very significant dos and don’ts to talk with your professional installer before the project starts. 

Stamped Concrete Installation

Do install joints in order to control cracking.

To be efficient, the joints should be cut at least to a depth of one-quarter the thickness of the slab. If you are troubled that the joints will take away the value of the appearance of the surface of the stamp, consult your professional installer to hide these joints by merging them into the patterns. 

Don’t ignore sub-grade preparation.

Well-compacted sub-grades are very vital to the integrity of the structure of concrete slabs. They help drainage and can prevent erosion of soil beneath the concrete as well. 

Do insist on the correct mix for certain exposure conditions. 

Will the stamped concrete be actually exposed to thawing and freezing, deicing chemicals as well as wear and tear from vehicle or foot traffic? Therefore, you will require a concrete mixture that is designed for high performance under certain conditions. In addition to that, focus on the cement in proportion on the amount of water or the cement-water ratio. Adding too much amount of water makes the concrete less durable and particularly, weakens it. To know more about it, visit http://www.3dconcretekc.com/. 

Do utilize a dry-shake pigment hardener.

This unique powder that is scattered onto the surface of the concrete prior to stamping, not only gives additional color, but also, will produce a more impermeable and denser surface. 

Don’t be cheap on reinforcement.

For several slabs on grade, the reinforcement of the concrete (in the form of welded wire mesh or steel bars) is very important to augment toughness as well as help to control or prevent cracking. This is very true for patios, driveways or other surfaces which will support foot or vehicle traffic. 

Maintenance Guidelines for Stamped Concrete 

A stamped concrete is basically strong as well as can last for a very long period of time when cared for accordingly. In some cases, it is even more tough than plain, regular concrete surfaces, particularly if a dry-shake pigment hardener has been utilized. The following are some of the general tips for maintaining and cleaning stamped concrete: 

Keep the concrete surface free of debris and dust with the use of a leaf blower, broom or by rinsing with water. Do not allow the debris to stay for a long time on a portion of the surface. 

Periodic sealing is the most ideal way to protect the concrete from abrasion, deicing chemicals, freezing and thawing conditions, and moisture penetration. 

And finally, in order to protect sheen and color of your stamped concrete, a sealer must be used to prevent color fading. 

read more

Tips for Selecting the Furniture in Your Living Room

»Posted by on Nov 5, 2017 in Furniture | 0 comments

 

In any household, one of the most significant rooms is the living room. Possibilities are the living room would be one of the most often occupied rooms in the house, whether you regularly entertain or you have a huge family. That is why you need to have a furniture that could withstand almost anything. Here are some tips for choosing something that could endure the wear and tear of heavy use to be sure that you are getting the most out of the living room furniture.  

Furniture 

Be Practical about Your Budget 

While you do not want to spend a lot of money on a new furniture set, you also do not want to get caught purchasing something that is made cheaply. Choosing a solid wood-framed piece may cost you several additional dollars. However, you would be happy when the sofa you have has not fallen apart after just several years of use. 

Wisely Select the Upholstery 

Particular materials are more resilient to numerous aging factors than other materials. For example, though leather and microfiber are resistant to stain, cotton is not. Similarly, cotton is resistant to moths whereas wool is infested by them. The fabrics that you want in your upholstery might vary, depending on your lifestyle and house. That is why you need to ensure that you do thorough research before purchasing. 

Get a Feel for what is inside 

The materials that the furniture is filled with are just as significant as the materials it is covered with. Polyurethane foam stuffing is easy to care for and cheap. However, they could depreciate rapidly more than down feathers or high-resilient foam. Even though feathers soft and cushy, they could stick out through the upholstery, they could be allergenic, and they clump easily together. Frequently, combination materials such as foam/polyester or foam/down are the best options because of their durability and affordability.  

Try it Before You Purchase It 

Though you might have only some several minutes of exposure to a furniture piece in a showroom setting, there are some several tests you could run to make sure that its quality is great. First, lift up a leg of the furniture at least 6 inches off the ground. The frame is not very sturdy if the other legs stay on the ground. Try also rubbing its fabric at least 20 up to 30 times to test for colorfastness. You could also sit on the furniture in some several various positions to be sure that its springs are not uncomfortable or have low-quality. 

You need to ensure that you know what you are getting yourself into before buying your living room furniture in Myrtle Beach. There are a lot of furniture store sales associates that are knowledgeable about the materials used and the durability in the pieces of furniture in their showrooms. Keep in mind that it is not just about style. You should have a furniture that could stand up to all of the occurrences in your house.  

read more

Items You Should Have In Your First Aid Kit

»Posted by on Oct 10, 2017 in First Aid Kit | 0 comments

Safety is one of the most common concerns of people. Everyone hates to get sick because it is very uncomfortable and the worst part about getting sick are the bills that you have to pay. When you get sick, there are a lot of things that you will be paying for because you will need the assistance of a lot of things and even people as well.  

First Aid Kit

These things do not come free which is why safety from any sickness of any form is highly avoided by people. The first step to safety is by taking precautionary measures. This is one of the best ways to ensure your safety in any place or situation because it means that you have studied the area or situation you will be getting into before you push through with it and plan all the situations that may end up bad and prepare for it.     

One of the best ways to ensure your safety in the day to day activities is by having a First Aid Kit in Dawson Creek. This is one of the easiest insurance policies you have access to because it has all the necessary tools that one would need during minor accidents. First aid kits would also be of help in major accidents because it would help give time for the ambulance to reach the area and hopefully give the people in that situations the tools to prolong the physical needs of the injured person. Here are some of the things you should have in your First Aid Kit.     

The first thing you should have in the First Aid Kit is the first aid kit manual. This is one of the most important parts of your kit because it shows people who are not familiar with the first aid kit a detailed explanation of how to use the tools found inside the kit. The manual is there so that if you are not in the room and the first aid kit needs to be used, people in the chamber will be able to use it properly and efficiently. Without the manual, they may be using the wrong medicine or applying the wrong cream on the wrong area which could lead to more problems than the one already at hand.     

Another tool that is very important in a first aid kit is alcohol. No this is not the beverage but the alcohol that is used to disinfect and sterilize hands or wounds that need to be cleaned. Alcohol is one of the most commonly used tools in the first aid kit which is why it is so important for it to be there.    

Without alcohol, your hands will not be sterile so you will not be able to touch wounds or medicines because your hands may have bacteria that could worsen the problem. Also, first aid kits are usually used when someone has a wound, and the best way to clean wounds is by using alcohol. The other items that you should have in your first aid kit should be present in the first aid kit manual. However, these are some of the items that you should have in your first aid kit.  

read more