Stamped Concrete Installation

Dos and Don’ts for a Great Stamped Concrete Installation

»Posted by on Mar 23, 2018 in Stamped Concrete Installation | 0 comments

The amazing surface effects with decorative stamped concrete are actually part of the whole package. As a matter of fact, you will be having one of the toughest paving materials your money can buy – if it is properly installed. Long-term stamped concrete begins with the basics such as ideal jobsite conditions, experienced and professional installer, good materials and the right tools. The following are the 5 very significant dos and don’ts to talk with your professional installer before the project starts. 

Stamped Concrete Installation

Do install joints in order to control cracking.

To be efficient, the joints should be cut at least to a depth of one-quarter the thickness of the slab. If you are troubled that the joints will take away the value of the appearance of the surface of the stamp, consult your professional installer to hide these joints by merging them into the patterns. 

Don’t ignore sub-grade preparation.

Well-compacted sub-grades are very vital to the integrity of the structure of concrete slabs. They help drainage and can prevent erosion of soil beneath the concrete as well. 

Do insist on the correct mix for certain exposure conditions. 

Will the stamped concrete be actually exposed to thawing and freezing, deicing chemicals as well as wear and tear from vehicle or foot traffic? Therefore, you will require a concrete mixture that is designed for high performance under certain conditions. In addition to that, focus on the cement in proportion on the amount of water or the cement-water ratio. Adding too much amount of water makes the concrete less durable and particularly, weakens it. To know more about it, visit http://www.3dconcretekc.com/. 

Do utilize a dry-shake pigment hardener.

This unique powder that is scattered onto the surface of the concrete prior to stamping, not only gives additional color, but also, will produce a more impermeable and denser surface. 

Don’t be cheap on reinforcement.

For several slabs on grade, the reinforcement of the concrete (in the form of welded wire mesh or steel bars) is very important to augment toughness as well as help to control or prevent cracking. This is very true for patios, driveways or other surfaces which will support foot or vehicle traffic. 

Maintenance Guidelines for Stamped Concrete 

A stamped concrete is basically strong as well as can last for a very long period of time when cared for accordingly. In some cases, it is even more tough than plain, regular concrete surfaces, particularly if a dry-shake pigment hardener has been utilized. The following are some of the general tips for maintaining and cleaning stamped concrete: 

Keep the concrete surface free of debris and dust with the use of a leaf blower, broom or by rinsing with water. Do not allow the debris to stay for a long time on a portion of the surface. 

Periodic sealing is the most ideal way to protect the concrete from abrasion, deicing chemicals, freezing and thawing conditions, and moisture penetration. 

And finally, in order to protect sheen and color of your stamped concrete, a sealer must be used to prevent color fading. 

read more